0

PRESSURE TESTING UNITS

Pressure testing and Valving Machine
Pressure testing and Valving Machine
Pressure testing and Valving Machine
Pressure testing and Valving Machine

Pressure testing and Valving Machine

M187-765-006

The same machine is used to:

- remove and insert the valves

- internal inspection at 45°

- prepared for pressure test

- invert the cylinders.

As the gas cylinder valve can be removed prior pressure testing, the handling of gas cylinders will be reduced to a minimum.

Inverter - designed for valving AND devalving AND pressure testing of 6 gas-cylinders, complete with electric worm gear motor, compressed air cylinder clamp arrangement with rubber covered clamp grips, protective mesh covers the back and the 2 sides, electric control box, fill heads and quick connectors for pressure testing.

Capacity: 6 gas cylinders

Turning: with stop position at 45° (internal inspection) and 180° for emptying

Cylinder diameter: 140-235 mm (other dimension onrequest)

Cylinder height: 700-1700 mm (other dimension on request)

VALVING MACHINE FOR GAS CYLINDERS complete with helical geared electric motor, telescopic shaft, standard valve wrench (M131-131-000).

The valving machine is fitted on a sliding carriage on an overhead rail.

The carriage is moved sideways by means of a compressed air cylinde

Read more
Read less
Pressure testing 6 cylinders

Pressure testing 6 cylinders

M187-000-006

Test pressure 450bar.

Height 1700 mm, Ø 140-235 mm

Pressure testing equipment for seamless cylinders. Using our high-pressure pump (pressure booster M647-698-000) and water filling pump and tank , one man can fill, pressure test and empty 60 cylinders (50 litre) an hour if the pressure is maintained for 30 seconds.

Consisting of inverter driven by an electric motor.

- Nos. filling heads M210-000

- Nos. quick connect test adapters M200-203-000

- Nos. emptying nozzle M519-000 with automatic valve

- suspension device, with of spring loaded arms.

- low-pressure copper manifold for connection to the water supply pipe.

- high-pressure stainless steel tube for connection to the pressure-testing pump.

- protective grating covering the sides and the back.


Read more
Read less
Proof pressure testing unit for 6 welded gas cylinders

Proof pressure testing unit for 6 welded gas cylinders

M187-192-006

Semi automatic hydraulic proof pressure - Testing unit  for welded gas cylinders. Sealed system.

Pressure up to 40 bar as standard.

- 1 Inverter. The cylinders are trapped against the base plate with a screw tightening fitting from above.

- 2 Manifold tubes in stainless steel,

- 1 Electric control box for inverter and water filling pump.

- 1 Plastic water tank and electric filling pump.

- 1 Protective grating covering the back and the two sides.

- 3 pneumatic actuated stainless steel valves for filling, pressure testing and emptying the cylinders

- 6 removable brackets for small cylinders

- 1 pressure relief valve (M647-485-647) in stainless steel/brass

- 6 Coaxial test heads), to fill pressure test and draining, will fit cylinders with fixed valve guard. Sealed against the top surface on the gas cylinders. No teflon tape is needed

All valves are operated from the test pump panel.

Capacity: 6 gas cylinders

Test capacity, not dried: 108 litre cylinders - 18 cylinders / hour and 27 litre cylinders - 45 cylinders / hour

Cylinder diameter: 0-380 mm (also available for other dimensions)

Cylinder height: 300-1420 mm (also available for other dimensions)

For cylinders with valve thread 25E / 25T as standard.

Test pressure: up to 40 bar as standard.

Water tank volume: 1260 litre

Read more
Read less
Proof pressure testing unit for 4 welded gas cylinders

Proof pressure testing unit for 4 welded gas cylinders

M187-192-004

Semi automatic hydraulic proof pressure - Testing unit  for welded gas cylinders. Sealed system.

Pressure up to 40 bar as standard.

- 1 Inverter. The cylinders are trapped against the base plate with a screw tightening fitting from above.

- 2 Manifold tubes in stainless steel,

- 1 Electric control box for inverter and water filling pump.

- 1 Plastic water tank and electric filling pump.

- 1 Protective grating covering the back and the two sides.

- 3 pneumatic actuated stainless steel valves for filling, pressure testing and emptying the cylinders

- 6 removable brackets for small cylinders

- 1 pressure relief valve (M647-485-647) in stainless steel/brass

- 4 Coaxial test heads, to fill pressure test and draining, will fit cylinders with fixed valve guard. Sealed against the top surface on the gas cylinders. No teflon tape is needed

All valves are operated from the test pump panel.

Capacity: 4 gas cylinders

Test capacity, not dried: 108 litre cylinders - 18 cylinders / hour and 27 litre cylinders - 45 cylinders / hour

Cylinder diameter: 0-380 mm (also available for other dimensions)

Cylinder height: 300-1420 mm (also available for other dimensions)

For cylinders with valve thread 25E / 25T as standard.

Test pressure: up to 40 bar as standard.

Water tank volume: 1260 litre

Read more
Read less
Equipment for steam drying
Equipment for steam drying

Equipment for steam drying

M239-399-105

Optional equipment to be mounted on the standard inverter for 6 cylinders. The steam drying equipment enables steam drying in the inverter.

- additional limit switch for drying position (horizontal position)

- 6 drying tubes in copper with a length of 1,2 meter each with steam hoses and manifold

- solenoid valve and timer for steam

- solenoid valve and timer for compressed air for cooling after steam drying.

A 4-cylinder inverter version is also available

Read more
Read less
Pressure testing unit for 6 cylinders - simplified model
Pressure testing unit for 6 cylinders - simplified model

Pressure testing unit for 6 cylinders - simplified model

M187-383-000

High pressure manifold in stainless steel to be connected to a high pressure test pump. Quick connect test adapters with high pressure hoses. 2 water filling heads for prefilling the cylinders to be connected to the main water supply. The filling heads are moved from cylinder to cylinder. 1 compressed-air nozzle for emptying the cylinders.

Estimated capacity together with two number of manual inverters for one cylinder each M239-595-000 (not included): 25 tested 50-litre cylinders/hour.

Read more
Read less
Pressure testing 2 cylinders

Pressure testing 2 cylinders

M187-000-002

Pressure testing equipment for 2 cylinders





Same as article :

Read more
Read less
Pressure testing 4 cylinders

Pressure testing 4 cylinders

M187-000-004

Pressure testing equipment for 4 cylinders




Same as article :

Read more
Read less
Pressure testing 4 cylinders 1800mm

Pressure testing 4 cylinders 1800mm

M187-770-004

Pressure testing equipment for 4 cylinders 1800mm




Same as article :

Read more
Read less
 PRESSURE TEST UNIT  - COAXIAL FILLING AND TEST HEAD SYSTEM.
 PRESSURE TEST UNIT  - COAXIAL FILLING AND TEST HEAD SYSTEM.
 PRESSURE TEST UNIT  - COAXIAL FILLING AND TEST HEAD SYSTEM.

PRESSURE TEST UNIT - COAXIAL FILLING AND TEST HEAD SYSTEM.

M187-682-006

Hydraulic proof pressure test unit - coaxial filling and test head system. Type 2.

The same adaptor is used both for filling and for pressure testing

The test unit consist of

1 Inverter with electric worm geared motor and control panel with compressed air cylinders, interlocked to invert.

1 Electric high capacity water filling pump with manual start and stop.

1 Stainless steel water catch tray / reservoir, to collect and reuse water. Complete with one 1 1/2” connection for drainage.

2 stainless steel high pressure ball valves, remote controlled

2 High pressure manifold tubes in stainless steel.

6 Coaxial fill and test heads (M682-608-001), FOR FILLING AND PRESSURE TESTING, W 28,8 x 1/14” taper 3:25 complete with hoses. The inner diameter between the weights is 90 mm, outer diameter 135 mm.

6 Hose suspension arrangements

6 nozzles (M519-000) and 1 automatic valve for emptying the cylinders with compressed air.

The machine is fitted with safety interlock and mesh screen to cover the back and 2 sides.

Estimated filling time, 6x50 litre: 2,5-3 min (connecting time not included) provided using supplied filling pump and storage tank.

Pressure testing: see test pump information

Capacity: 6 gas cylinders

Cylinder diameter: 200-300 mm

Cylinder height: 700-1800 mm

Test pressure: up to 450 bar

Catch tray / reservoir volume: 800 L

High pressure test pump is not included.

Recomended pumps: M647-698-000 Double acting test pump (booster) or M647-587-000 Pneumatically powered pressure testing pump.

OPTIONAL: Inverter frame work in stainless steel.


Read more
Read less
Pressure testing 6 cylinders 1800mm

Pressure testing 6 cylinders 1800mm

M187-770-006

Test pressure 450bar.

Height 1800 mm, Ø up to 300 mm

Pressure testing equipment for seamless cylinders.Using our high-pressure pump (pressure booster M647-698-000) and water filling pump and tank , one man can fill, pressure test and empty 60 cylinders (50 litre) an hour if the pressure is maintained for 30 seconds.

Consisting of inverter driven by an electric motor.

- Nos. filling heads M210-000

- Nos. quick connect test adapters M200-203-000

- Nos. emptying nozzle M519-000 with automatic valve

- suspension device, with of spring loaded arms.

- low-pressure copper manifold for connection to the water supply pipe.

- high-pressure stainless steel tube for connection to the pressure-testing pump.

- protective grating covering the sides and the back.


Read more
Read less
Pressure testing 8 cylinders

Pressure testing 8 cylinders

M187-356-004

Pressure testing equipment for 8 cylinders




Same as article :

Read more
Read less
Pressure testing 10 cylinders

Pressure testing 10 cylinders

M187-356-010

Pressure testing equipment for 10 cylinders




Same as article :

Read more
Read less

We place cookies on your computer to remember your settings and understand how people use our website. By using this site you accept this.