0

INVERTER

Ronning equipment for inverting, turning gas cylinders and bundles.

Manual inverter for turning gas cylinders.
Inverter for 1 gas cylinder - manual operation
Inverter for 1 gas cylinder - manual operation

Inverter for 1 gas cylinder - manual operation

M239-595-000

Wide range manual inverter for 1 gas cylinder.

The frame with the clamp arms is adjustable in height by means of a crank. Complete with compressed air thrust cylinder and actuator for clamping. The cylinder is turned by hand.

Dimensions: front 500 x side 800 mm (+ gas cylinder)


Capacity:

Cylinder diameter: 100-400 mm

Cylinder height up to 1800 mm

Cylinder weight: 125 kg

Read more
Read less
Optional fitting for manual inverter.

Wheels with brackets

M239-595-124

1 Set of wheels with brackets . Consists of 4 wheels (2 with brakes)

Optional fitting for the 1-cylinder inverter M239-595-000, which will make it more portable.

Read more
Read less
Inverter for 1 gas cylinder
Inverter for 1 gas cylinder

Inverter for 1 gas cylinder

M239-595-675

Powered inverter with diameter 100-400 and height 1800. Complete with compressed air cylinder, grating guard covering two sides, electric worm geared unit of 0,25 kW

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 4 gas cylinders

Inverter 4 gas cylinders

M239-000-004

Maximum height 1700mm, width Ø140-235mm

Same as article:

Read more
Read less
Inverter for 2 gas cylinders

Inverter for 2 gas cylinders

M239-000-002

Powered inverter for 2 cylinders

with diameter 140-235 mm and height 700-1700.

Complete with grating guard covering two sides, electric motor of 0,25 kW,

3 limit switches for loading, inspection and the emptying position.

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 4 gas cylinders.

Inverter 4 gas cylinders.

M239-482-104

Maximum height 1700mm, width Ø140-380mm


Same as article:

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 6 gas cylinders

Inverter 6 gas cylinders

M239-000-006

Also available for 2,4,8 or 10 cylinders.

Maximum height 1700mm, width Ø140-235mm

The cylinders are clamped in a frame by compressed-air cylinders. Working pressure 6-10 bar. A worm gear motor of 1.1 kW upends the cylinders through a strong chain gear (25 mm - 1”). The movement is stopped at the end positions by limit switches. There are also mechanical stops in the form of heavy rubber buffers. The whole operation takes only 10 seconds.

The cylinders are supported at the bottom by a metal sheet, 3 mm thick.

If a compressed air hose or pipe bursts the cylinders are prevented from being released by pneumatic blockers on the compressed-air cylinders.

It is only possible to operate the hand valve for cylinder clamping when the cylinders are standing on the floor.

The motor is prevented from starting if the pressure is too low and before the cylinders are clamped in place.

The compressed air cylinder is a single-acting one and does not require any piston-rod seal, thus there is no risk of leakage.

The inverter is equipped with a protective grating on three of the sides.

Read more
Read less
Inverter 6 gas cylinders - Stainless steel

Inverter 6 gas cylinders - Stainless steel

M239-000-106

LRonning Inverter for 6 gas cylinders in stainless steel for cylinders with diameter 140-235 mm and max. height 1700 mm. Complete with SWEDRIVE worm gear motor 1.5 kW, compressed air cylinders to clamp the gas-cylinders, protective mesh covers the back and the 2 sides, electric control box.

The following parts in STAINLESS STEEL: Stand, frame (not counterweight), clamp arms

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 6 gas cylinders.

Inverter 6 gas cylinders.

M239-241-006

Maximum height 1600mm, width Ø140-320mm


Same as article:

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 6 gas cylinders.

Inverter 6 gas cylinders.

M239-482-106

Maximum height 1700mm, width Ø140-380mm


Same as article:

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 6 gas cylinders

Inverter 6 gas cylinders

M239-350-006

Maximum height 1800mm, width Ø200-300mm


Same as article:

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 6 gas cylinders

Inverter 6 gas cylinders

M239-482-006

Maximum height 1800mm, width Ø140-380mm


Same as article:

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 8 gas cylinders.

Inverter 8 gas cylinders.

M239-000-008

Maximum height 1700mm, width Ø140-235mm


Same as article:

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 10 gas cylinders.

Inverter 10 gas cylinders.

M239-000-010

Maximum height 1700mm, width Ø140-250mm


Same as article:

Read more
Read less
Ronning Inverter for gas cylinders. Equipment for turning cylinders.
Inverter 10 gas cylinders.

Inverter 10 gas cylinders.

M239-350-010

Maximum height 1800mm, width Ø175-300mm


Same as article:

Read more
Read less

We place cookies on your computer to remember your settings and understand how people use our website. By using this site you accept this.