0

DRYING GAS CYLINDERS

Drying unit for 6 gas cylinders

Drying unit for 6 gas cylinders

M254-254-000

Drying unit for 6 gas cylinders

This dryer is of the conventional type. Air is heated by a 10 kW electric element and blown into the cylinders, using a high-pressure fan. The manifold is thermally insulated. A timer allows the air heater to be switched off after a predetermined time.

Drying time is approximately 20-25 minutes depending upon ambient conditions.

An ejector is supplied to blow out quickly any water that has drained down the walls of the cylinder to the bottom. The drying time can be reduced by this means to 15-20 minutes.

If dry nitrogen is available, the drying time for both types of equipment can be reduced considerably. The connection is easy to make.

The drying unit is supplied with flexible metal conduits for hot air.
The flexible metal conduits can also be supplied separately to be used on old machines




Read more
Read less
Drying unit for 45 gas cylinders
Drying unit for 45 gas cylinders

Drying unit for 45 gas cylinders

M254-539-045

The drying unit can be used to dry cylinders standing on a pallet or in a crate. The machine is designed to be

installed hanging in chains from the ceiling. Due to the flexible metal hoses it very is simple to connect.

Drying unit complete with electric 2x air-heater, 2x blower, ejector, 45 flexible metal hoses (Ø 17 mm) for drying and Electric control box with timers for drying time and cooling time for the heater.

The manifold is insulated with mineral wool and covered with sheet metal plate.

Heater: 2 pcs 3x380-440 V, 50/60 Hz, 9.9-13.3 kW.

Blower: 2 pcs 3x380-415 V, 50/60 Hz, 250 W, 1200 l/min.

Read more
Read less
Inlet filter for drying unit

Inlet filter for drying unit

M254-109-000

Optional fitting for for drying unit.

Supplied complete with filter, housing, fittings and vacuum gauge. Filtration: 10 micron

Read more
Read less
Drying unit for small gas cylinders

Drying unit for small gas cylinders

M254-259-006

Ronning Drying unit for 6 small gas cylinders

This dryer is designed for small cylinders (up to 7 litres). The cylinders are dried upside down.

Heater: 3x380-415 V, 50/60 Hz, 5 kW.

Blower: 3x380-415 V, 50/60 Hz, 250 W, 1200 l/min.

Supplied complete with control panel with timer for running time.

Read more
Read less
Drying unit for 4 gas cylinders. Height 1700 mm, Ø250 mm

Drying unit for 4 gas cylinders. Height 1700 mm, Ø250 mm

M254-283-000

Drying unit for 4 gas cylinders





Same as article :

Read more
Read less
Drying unit for 6 gas cylinders. Height 1700 mm, Ø380 mm

Drying unit for 6 gas cylinders. Height 1700 mm, Ø380 mm

M254-892-000

Drying unit for 6 gas cylinders. 






Same as article :

Read more
Read less
Drying unit for 8 gas cylinders. Height 1700 mm, Ø250 mm

Drying unit for 8 gas cylinders. Height 1700 mm, Ø250 mm

M254-255-000

Drying unit for 8 gas cylinders





Same as article :

Read more
Read less
Drying unit for 8 gas cylinders. Height 1900 mm, Ø250 mm

Drying unit for 8 gas cylinders. Height 1900 mm, Ø250 mm

M254-255-001

Drying unit for 8 gas cylinders.





Same as article :

Read more
Read less
Portable stand on wheels
Portable stand on wheels
Portable stand on wheels

Portable stand on wheels

M254-549-006

Portable stand on wheels to enable drying of 6 small cylinders with diameter up to 240 mm and height up to 700 mm.

Will also support cylinders with round bottom. Height 700 mm. The cylinders are easy to handle due to an opening at the front. Drying unit is not included

Read more
Read less
Electric vacuum pump
Electric vacuum pump

Electric vacuum pump

M254-732-000

Electric Vacuum Pump

with 12 litre container, hose and tube and water trap. Mounted on a portable rack.

The vacuum pump can be used to remove excessive water at the bottom in a gas cylinder.

The water is drawn up and collected in a plastic container.

Read more
Read less

We place cookies on your computer to remember your settings and understand how people use our website. By using this site you accept this.