0

CLEANING & PAINTING MACHINE

Ronning equipment for cleaning and painting gas cylinders.

Ronning Buffing painting Machine. Machine for painting and buffing gas cylinders. Clean and remove rust.
Buffing painting machine for gas cylinders.
Ronning Cleaning & Painting Machine

Ronning Cleaning & Painting Machine

M148-000

Machine for buffing and painting gas cylinder. It is possible to clean and and remove rust from a gas cylinder without removing any paint in good condition.

Cylinders with or without valves can be handled.

The gas cylinder is placed on a turntable which is driven by a geared motor let into the floor.A sleeve with ball bearing is placed on the neck ring of the cylinder. This sleeve runs on a guide rail and is adjustable for different cylinder heights.

The two wire brushes, are carried on an arm and applied to the cylinder by spring pressure when the arm is swung to the working position. The arm with motors runs along a vertical guide rail by means of ball bearings. IWhen the brush arm is swung in, the door follows with it and closes off the booth.

After the cylinder has been cleaned, the door is opened, and the brush motors stop automatically. While the cylinder is still rotating, it is painted with the double roller device (M169-159-001) which only has to be dipped into the paint trough once per cylinder. The paint is distributed very evenly, and there is no spillage as when spray painting.

The machine must be connected to a Filter box or a Dust extractor unit

Read more
Read less
Filter Box

Filter Box

M148-165

If there are dwellings or offices nearby this filter box should be connected to the M148-000 Buffing and painting machine.

The filter cartridge is automatically cleaned by means of compressed air. Average efficiency, dry dust: > 99%.

Fan air-flow (freely discharging) 1400 m3/h. Power: 1,1 kW.



Sound level:

  • Brushing machine M148-000 alone: 75 - 77 dB(A)
  • plus filter box without silencer: 84 dB(A)
  • plus filter box with silencer: 80 dB(A)

Read more
Read less
Cleaning & Painting Machine max. Ø380mm

Cleaning & Painting Machine max. Ø380mm

M148-151

Painting & Buffing machine for large gas bottles Ø350mm




Same as article :

Read more
Read less
Ronning Buffing painting Machine. Machine for painting and buffing gas cylinders. Clean and remove rust.
Buffing painting machine for gas cylinders.
Cleaning & Painting Machine max. height 2100mm

Cleaning & Painting Machine max. height 2100mm

M148-149

Painting & Buffing machine for gas bottles with a maximum height of 2100mm and Ø270mm




Same as article :

Read more
Read less
Dust extractor unit

Dust extractor unit

M148-163

The dust extractor unit consist of one electric fan, cyclone and dust container. It's very reliable and easy to maintain.

The cleaned air must be allowed to escape into the open. Due to the sound level it's recommended to place the unit outdoors.

It is worth remembering that a large amount of heated indoor air (only valid for some countries) is replaced by outdoor air. The Filter Box (M148-165) may then be preferable.

Average efficiency, dry dust: 85%

Air flow (freely discharging): 850 m3/h

Total disposable pressure outside the unit: 100 mm water column

Noise level, 1m from unit: 75 dB(A)

Speed: 2900 rpm

Power: 1,5 kW

Dust container: 20 dm3

Weight: 75 kg

Read more
Read less
Device for cleaning and painting small cylinders
Device for cleaning and painting small cylinders

Device for cleaning and painting small cylinders

M148-153

This attachment is available to permit brushing and painting of cylinders smaller than those of a capacity of 10 litres. A special insert is placed in the rotating sleeve so that the smaller type neckrings will fit.

The cylinder is at a convenient working position for painting.

Read more
Read less
Exterior Cleaning & Painting Machine placed on floor

Exterior Cleaning & Painting Machine placed on floor

M148-472

Exterior Cleaning & Painting machine placed directly on floor (pit not required).




Same as article :

Read more
Read less
Exterior Cleaning Machine For Gas Cylinders

Exterior Cleaning Machine For Gas Cylinders

M148-817

Handling by overhead conveyor transport system.

The machine is designed for brushing steel gas cylinders, in order to remove loose paint and roughen painted surfaces to improve the adhesion of new paint.

Please contact us for further information.

Read more
Read less
Brushing equipment for neckring threads
Brushing equipment for neckring threads

Brushing equipment for neckring threads

M148-325

Brushing equipment for neck-ring threads


  • driven by one electric motor
  • applies constant force
  • turned manually once around the cylinders
  • safety plate cover neck-ring and brush



Read more
Read less
External Brushing and Painting Machine for pressure drums

External Brushing and Painting Machine for pressure drums

M148-640-000

Loose paint, rust and dirt on the cylindrical part of a tank/ drum will be removed by means of steel wire brushing as the tank is rotating in horizontal position.

The inside of the tank ”foot ring” will be suspended by 2 rollers on each side.

Capacity: 1 drum with diameter 800 mm and length up to 2000 mm.

Loading: by means of a fork lift.

The machine is supplied with:

- Floor frame,

- 2 side supports with motor and rollers for rotation.

- Adustable drum support

- Turning motor

- 1 brush motor with circular steel wire brush.

- 1 brush motor travel arrangement. Adjustable travel speed.

- Protective grating with interlocked door

- Tools for manual painting

Read more
Read less
2 position cabinet for cleaning and painting gas cylinders.
Revolving Cleaning & Painting Machine
Revolving Cleaning & Painting Machine

Revolving Cleaning & Painting Machine

M148-169-109

2 position cabinet; 1. cleaning - 2. painting - load/unload.

Doors to isolate each section.

Turning device for 2 cylinders with turning motors.

Cleaning arrangement, cleaning by mean of rotating steel wire brushes.

Cylinder dimensions:

Cylinder diameter: 140- 270 mm (5,51”-10,63”)

Cylinder height: 200-1650 mm (0-6,96”)

- cubicle, walls and door of sound absorbing material.
- 2 brush motors with steel wire brushes.
- automatic brush arm travel arrangement with variable speed transmission and automatic return for the brush motors.
- tools for painting with double paint roller device (M169-159-000) with paint tray included.

Estimated time for every newly painted cylinder that can be unloaded, will be between 1-5 minutes, depending on the condition of the uncleaned cylinders.

Dust extractors and blower must be fitted to prevent dust spreading, not included, to be quoted separately.

Read more
Read less

We place cookies on your computer to remember your settings and understand how people use our website. By using this site you accept this.